店铺综合评价:
Product name
Plastisol ink with special effect
State
Paste
Packing
25KG/drum for white, 20KG/drum for other colors
Storage
12 months in cool place
Application
1. Suitable for automatic, manual printing, can create 3D sharp up and round up effects etc.
2. Suitable for all fabrics which endurable in high temperature of 150-180 degree.
Features
1. High fastness
2. High glossy
3. High softness
4. SGS detecting passed, no phthalate, no heavy metal, no NPEOs.
Mix proportion
Plastisol ink 100%, or can be intermixed with other colored plastisol inks
Printing process
1. Printing with plastisol ink for 3-4 times(3-4 scrapes per time)
2. Thin the plastisol ink with thinner before last printing
3. Take up the screen plate slowly and slightly to make the special effect
4. Baking for 1~3 minutes under 150~180℃ to dry it.
5. Finish.
Attentions
1. The fabric must endurable in hot temperature, it’s not suitable for airtight fabric.
2. Thick screen is suggested for the best effect .
3. Please thin the plastisol ink before last printing to make the best effect
品名
外观
糊状
包装
白色25KG/桶,其他色20KG/桶
贮存期
常温下12个月
应用
100%棉、棉/涤混纺、涤纶、深浅色布、牛仔布等各种织物,凡满足以下两点的织物均可使用:
1. 能耐150C~180C;
2. 有透气性,可以使油墨渗透进去。不适合的承印物比如:塑料、金属、玻璃等及经防水处理的尼龙布。
卖点
1. 超强洗水牢度
2. 高亮度
3. 手感柔软
4. 符合美国ASTM对邻苯二甲酸脂和欧盟EN71 Part 3对重金属含量的要求
调配比例
可以直接印花,或用不同颜色相互调配成其他色
工艺流程
1. 丝网选用100-120目厚板,用丝印硬方刀75度刮印2次,印第一次时用力刮4-6刀
2. 最后一次刮印前将热固油墨稍加开稀,印后轻轻起板留浆即可做出拉浆效果
3. 用热风枪吹至表干,然后150-180度焙烘过热1-3分钟,不能压烫
注意事项
1. 最后一次刮印前一定要将油墨开稀,否则无法形成完美的拉浆效果
2. 墨层一定要烘熟,否则会影响牢固度
用途:
印刷
适用范围:
印花
使用方法:
100
组成成份:
化工
性状:
透明
化学名:
树脂
分子式:
120
分子量:
包装:
诺曼特
索引号:
PH值:
1
本产品为印花类水性浆料,适用于棉布胶浆印花,高弹性织布的印花 产
品
包装 使用说明
李小姐
芳香油墨 摩擦散发香味 感香油墨
天津百仕维超厚多功能工业擦拭布
广东科展环保材料 PET哑光油墨 高哑耐刮耐高温耐水煮
澳达水性木器漆抗刮伤剂 油漆耐磨抗划剂AD3210 涂膜手感光滑
供应商:李小姐
深圳诺曼特科技有限公司
请供应商联系我
联系方式暂未开放